The new SmartSolar MPPT RS 450/100-Tr solar charge controller is Victron's solution for systems with large series connected PV arrays charging 48VDC nominal battery banks. This product is perfect for large off-grid and grid connected battery systems.
Available in a 5.76kW and 11.52kW model (coming soon), features include a wide 80-450VDC operating solar voltage input limit (do not exceed), independent tracking inputs, full connectivity, isolated PV connections, display screen, fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernise the presentation in line with the latest suite of Victron products.
MPPT: Ultra-fast Maximum Power Point Tracking
The SmartSolar RS solar charge controller connects to a PV array of between 80 and 450VDC VOC and will efficiently charge your 48V nominal battery bank with either 100A or 200A. Please note: the array VOC must never, under any conditions, exceed the 450V input limit.
The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium and more. Please note: Off-common-nominal voltage battery banks are not supported.
Easy Setup with VictronConnect
The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.
Daisy-Chain Additional Units
The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy chained” to each other with a Victron RJ45 UTP cable.
When connected to each other, all individual charge controllers, will synchronise their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).
Dedicated Display
The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.
I/O Ports
The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.
