Single Point Power Posts

Use these single studs to terminate multiple connections - up to 4 per ABYC standards. Built with stainless studs, nuts, and washers, they're designed for the marine environment.

Available alone or with your choice of red PVC insulating cap:
   - Small for #4 to #1 AWG wire
   - Medium for #1 to #2/0 AWG wire
   - Large for #4/0 AWG wire.

There is some flexibility with sizing, a larger one will usually work well. The caps meets ABYC E-9, USCG 33 Subpart I, and NHTSA FMVSS.302 standards.

• Maximum current: 150 A @ 12 VDC
• Maximum voltage: 48 VDC
• Stud length: 1" (30mm)
• Mounting screws: #10 or 1/4" (not included)
• Dimensions, without cap: 3.3" L x 11.75" W x 2.2" H (84 x 44 x 56 mm)
• Mounting center: 5.7" (145mm)
• Base: Glass-filled nylon
• Studs, nuts, washers: Stainless steel
• Cap: PVC, -44C to 105C, UL 94 V2